How to Connect a Motorola Baby Monitor to Phone With the USB Cable

If you are thinking of connecting your Motorola baby monitor to your phone, this article will help you with the process. This also works with the best baby monitors for twins.

This is an important step if you want to monitor your child’s activities when you can’t be there. Let us start with the connectors, Bluetooth is the common standard and it can be used on any mobile phone. Motorola has its own unique solution, the Bluetooth wireless technology allows you to link your baby monitor with your phone using a special adapter. The process is very simple and quick, you just have to read this information and follow the steps.

Before starting, make sure you turn off the power to your phone using the cord. Next, you need to find your Motorola baby monitor and remove the protective cover. Now you can locate the receiver in the top right corner of the phone. Make sure the receiver is straight and also do not forget to adjust the strap of the receiver properly to your hands.

Turn your back to see the actual cradle, it should look like a square cradle on your phone. After that you need to lift the actual cradle by sliding it forwards and then snap it open. You can now insert the other end of the Bluetooth cable into the corresponding holes on the back of the cradle. You should notice a slot to plug the cradle into the phone.

Now you have successfully connected your baby monitor to your phone, but how do you use it? It is pretty simple, all you need to do is hold the cradle close to your body and use the supplied sensor to locate the baby. Some phones have a button on the side or at the base which you can use to activate or deactivate the unit. If none is provided, simply put the phone on the ground next to the cradle. Now you can begin monitoring the child’s needs.

One thing to keep in mind is that the accuracy of this device can greatly improve if you use two receivers. Put one next to each ear, so that both parties will hear the child. One of the main disadvantages of using two receivers is that they are likely to clash. In case of any misalignment, you may either end up with one receiver over the other or the one near the wall will become damaged. Furthermore, if you use two, you will not be able to check on the child in case of any sudden change in location. On the other hand, if you use only one receiver, you can be sure to hear the child from any corner of the house.

Another issue that you may encounter when using one of these devices is that the range may be somewhat less than that of conventional baby monitor. This is because the phones used for these devices are smaller than the typical mobile phone. Thus, the range may be limited by factors such as the signal strength and frequency of operation among others. However, you will find that most parents would opt for a wider range so that they could ensure that they hear the child even when the child is a distance away from the parent. The best way to overcome this problem is by choosing a stronger signal.

When you have successfully installed the Motorola baby monitor to phone, the next step is to turn the volume down. Most parents would opt to monitor their child at lower volume anyway, because it has been observed that children tend to behave better when they are in a peaceful environment. Once you are done, connecting the device, test the connection by sending text messages or calling other users. Make sure to answer the call or text promptly and to do so from a close distance, just in case the other party does not have an account with the mobile network provider you are using.

Most people are surprised to know that you can use your cell phone to monitor your baby’s activities. However, you have to follow some guidelines to avoid getting into trouble. First, you have to make sure that the location you are monitoring is secure enough. If you are working on your own property, you have to make sure that no one is going to come to see you. Second, you need to make sure that there is no major distraction near your device. Finally, you need to read the instructions provided by the mobile phone company when you are still learning how to connect Motorola baby monitor to phone with the USB cable.

Leave a Comment